Conventional fire alarm systems

SATEL Conventional detector base DB-100Conventional mounting base for point fire detectorsThe mounting base for CSP system detectors facilitates the assembly and dismantling of the detectors without the need to disconnect cables. This greatly simplifies the implementation of periodical system mainte..

SATEL TCP/IP Ethernet communication module for conventional alarm panels CSP-ETHCommunication with a virtual panel moduleThe server module of the virtual panel is designed to remotely monitor the status of a fire alarm system which uses the CSP-100 and CSP-200 series control panels. The module can v..

SATEL Conventional sounder for outdoor use SPP-111Conventional fire alarm sounder for outdoor useThe SPP-111 sounder is used for acoustic alarm signaling. The sounder is designed to work with the SATEL fire alarm control panels (conventional: CSP-104, CSP-108, CSP-204, CSP-208; addressable: ACSP-402..

SATEL Conventional internal sounder (low base) SPP-110The SPP-110 sounder is used for acoustic alarm signaling. The sounder is designed to work with the SATEL fire alarm control panels (conventional: CSP-104, CSP-108, CSP-204, CSP-208; addressable: ACSP-402).acoustic signaling by means of piezoelect..

SATEL Conventional manual call point (outdoor) ROP-111/EUThe ROP-111 call point is used to manually trigger an alarm when a fire is discovered. The call point is designed to work with the CSP-104, CSP-108, CSP-204 and CSP-208 fire alarm control panels.resettable plastic panekey to enable: testing / ..

SATEL Conventional manual call point (internal) ROP-110/EUThe ROP-110 call point is used to manually trigger an alarm when a fire is discovered. The call point is designed to work with the CSP-104, CSP-108, CSP-204 and CSP-208 fire alarm control panels.resettable plastic panekey to enable: testing /..

SATEL Conventional optical smoke and heat detector DMP-100The point multi-sensor detector combines in a single device the functionality of visible smoke detection, the rate-of-rise detection and the detection of cases of exceeding the limit temperature. Owing to this combination of detection technol..

SATEL Conventional rate of rise heat detector DCP-100The point heat detector is designed to detect a rapid rise in temperature or cases of exceeding the limit temperature as a result of a developing fire.A1R heat detector in conformance with EN54-5simple installation of the detector at the base of D..

SATEL Conventional optical smoke detector DRP-100The point smoke detector is designed to detect visible smoke which is present when a fire is developing.unique Swirl chamber accelerates smoke detectiontest fires detected: TF-2 to TF-5 acc. to EN54-7 and TF-1 and TF-8 acc. to ISO/TS 7240-9:2006stainl..

SATEL Fire alarm control panel, 8 detection circuits, LCD, EN54, CSP-208CSP - 200 series are advanced, conventional fire alarm control panels in full conformance with the requirements of EN54. They are designed for the implementation of simple systems in small and medium-sized facilities. The built-..