Your Cart

Network Cable Length Tester DK-8108

Network Cable Length Tester DK-8108
Network Cable Length Tester DK-8108
  • Stock: In Stock
  • Product code: 30877
  • MPN:
Samples sold 8
Product Views: 7234
Ex Tax: 92.50лв.
на 12 вноски по 10.93 лв.

Вземи желания продукт сега, избери подходяща за теб схема на изплащане:

Не е нужно да избираш, може да имаш всичко!
Купи на равни вноски стоки от 100 до 30000 лв., избери най-подходящата за теб вноска.
С TBI Pay, пазаруването е лесно, гъвкаво и напълно онлайн.
Контролът е в твоите ръце, не чакай.

Виж схемите, които предлагаме
Добави в количката
Заяви и купи сега

UTP STP Cat5E/Cat6 RJ45 Lan Network Cable Length Tester DK-8108


1. Measure network cable length to an end or broken point.

2. Check wiring error in STP UTP 5E, 6E, coaxial cable, such as open circuit,short circuit, jumper wire, reverse connection.

3. Display by big LCD, with clear wiremap.

4. Automatically time-delay shut off.

5. Length Calibration: User can set self-calibration factor by a given length cable (The length of calibrating cable needs to be more than 5M )

6. Self-checking and automatically compensate any change in battery capacity or ambient temperature.

Technical Parameters




LCD 61.5x25.2 mm

Type of cable tested

Lan cable (5E, 6E), coaxial cable

Compatible connectors


Tone frequency

225 Hz

Max. distance of cable map

1-305m (3-1000ft) for twisted pair

Calibration accuracy

97% (± 0.5m or ± 1.5 ft) (calibrating cable > 5 M)

Calibration accuracy

5% (± 0.5m or ± 1.5 ft) (AMP, AT&T Class 5 cable)

Max. working current

Less than 70mA


LCD display 

Unit of Measurement

Meter (M) or Feet (FT)

Low battery display

LCD ( 6.5V)

Voltage protection

AC 60V/DC 42V

Battery Type

DC 4x1.5v

Working Ambient Temperature

Write a review

Note: HTML is not translated!
Bad Good